Effects of nano-sized aluminum on detonation characteristics and metal acceleration for RDX-based aluminized explosive

Nano-sized aluminum(Nano-Al)powders hold promise in enhancing the total energy of explosives and the metal acceleration ability at the same time.However,the near-detonation zone effects of reaction between Nano-Al with detonation products remain unclear.In this study,the overall reaction process of 170 nm Al with RDX explosive and its effect on detonation characteristics,detonation reaction zone,and the metal acceleration ability were comprehensively investigated through a variety of experiments such as the detonation velocity test,detonation pressure test,explosive/window interface velocity test and confined plate push test using high-resolution laser interferometry.Lithium fluoride(LiF),which has an inert behavior during the explosion,was used as a control to compare the contribution of the reaction of aluminum.A thermochemical approach that took into account the reactivity of aluminum and ensuing detonation products was adopted to calculate the additional energy release by afterburn.Combining the numerical simulations based on the calculated afterburn energy and experimental results,the param-eters in the detonation equation of state describing the Nano-Al reaction characteristics were calibrated.This study found that when the 170 nm Al content is from 0％to 15％,every 5％increase of aluminum resulted in about a 1.3％decrease in detonation velocity.Manganin pressure gauge measurement showed no significant enhancement in detonation pressure.The detonation reaction time and reaction zone length of RDX/Al/wax/80/15/5 explosive is 64 ns and 0.47 mm,which is respectively 14％and 8％higher than that of RDX/wax/95/5 explosive(57 ns and 0.39 mm).Explosive/window interface velocity curves show that 170 nm Al mainly reacted with the RDX detonation products after the detonation front.For the recording time of about 10 μs throughout the plate push test duration,the maximum plate velocity and plate acceleration time accelerated by RDX/Al/wax/80/15/5 explosive is 12％and 2.9 μs higher than that of RDX/LiF/wax/80/15/5,respectively,indicating that the aluminum reaction energy significantly increased the metal acceleration time and ability of the explosive.Numerical simulations with JWLM explosive equation of state show that when the detonation products expanded to 2 times the initial volume,over 80％of the aluminum had reacted,implying very high reactivity.These results are significant in attaining a clear understanding of the reaction mechanism of Nano-Al in the development of aluminized explosives.     

基于多信息的柴油机缸套磨损故障诊断研究

采用了模糊神经网络模型,对柴油机缸套磨损故障以及缸套破坏性磨损故障进行了诊断研究.通过缸套磨损故障的模拟实验,获取柴油机机身振动和铁谱分析等多源多维故障信息,并对融合故障信息进行预处理,解决了模糊神经网络输入矢量的模糊特性化、输出矢量的隶属函数及网络的学习训练问题,对缸套不同磨损故障进行了诊断.研究表明,这种基于多信息的诊断方法减小了故障诊断的不确定性,提高了诊断精度.     

多孔材料药型罩聚能射流的形成条件

依据Herrmann状态方程和斜冲击波关系估算了多孔材料药型罩压垮之前的冲击温升,求解了经过冲击压缩卸载后材料的声速。给出了多孔材料药型罩聚能射流的形成条件。初始冲击温升会使材料的声速和强度降低,从而使多孔材料聚能射流形成射流的高速和低速条件降低。     

金属风暴武器系统反导命中模型研究

根据金属风暴武器系统具有多管同时发射和超高射速的特点,从弹幕射击入手,建立了金属风暴武器系统反导射击毁伤的数学仿真模型。对研究金属风暴的作战效能研究具有重要意义。     

镁基水反应金属燃料及水冲压发动机初步试验

通过热力学计算预估水冲压发动机的性能,确定了燃料配方,并研制出试验用镁基水反应金属燃料。成功进行了水冲压发动机原理样机热试车,对水冲压发动机及其燃料的性能进行了初步研究。     

PELE正侵穿金属薄靶轴向剩余速度近似计算与分析

运用冲击波理论,对横向效应增强型弹丸(Penetration with Enhanced Lateral Efficiency,PELE)侵穿金属靶板的机理进行了分析,将PELE侵彻过程中能量损失分为外壳和内芯撞击靶板区域环形塞块获得的能量,冲击波影响范围内外壳和内芯增加的内能,外壳前端外沿和内沿对靶板冲塞剪切耗能等,给出了确定这些能量的计算方法;并依据能量守恒原理,给出了PELE正撞金属薄靶板靶后剩余速度的近似计算公式。公式计算结果与多种条件下实验结果均吻合较好。分析计算所得各能量损失结果表明,弹体内芯材料的变化对弹体侵彻能力的影响较小;侵彻中靶板塞块获得的能量在弹体侵彻动能损失中比重最大;外壳前端内沿对靶板的剪切能耗对弹体动能损失的影响可以忽略。     

管道金属磁记忆检测技术现状分析及发展研究

针对管道无损检测问题，阐述了金属磁记忆效应的基本原理，与传统无损检测方式比较，归纳了磁记忆检测的基本特性。在磁记忆检测仪器研发现状的基础上，设计了新型管道磁记忆／漏磁综合检测仪。从检测机理、信号处理和缺陷识别3个方面对检测技术研究现状进行分析和总结。探讨了检测机理的局限性，提出管道磁记忆检测技术的研究新方向。     

Schedule design for liner services under vessel speed reduction incentive programs

Gas and particulate emissions from ship transportation have been increasing in recent years. In order to mitigate ship emissions near coastal areas, voluntary vessel speed reduction incentive programs (VSRIPs) were put in place by a number of ports. This paper studies a schedule design problem faced by liner shipping companies under VSRIPs. It proposes a mixed-integer nonlinear mathematical model for the minimization of the total cost, consisting of fuel cost, as well as operating cost, minus dockage refunds. The model balances three determinants, that is, the compliance of VSRIPs, the speed limit (the maximum physical speed of ships and the upper speed limit imposed by VSRIPs), and the limited number of ships. An enumerative algorithm and a piecewise-linear approximation algorithm are developed, based on some properties of the nonlinear model. The efficiency of the proposed algorithms is validated through extensive computational experiments.     

层流介质中金属板腐蚀电位分布研究

为了研究流动介质中产生的静电场,结合电化学和流体力学相关知识建立层流介质中金属板模型,利用贝塞尔函数展开及其逆运算推导出在三层介质中基于点电荷模型的腐蚀电位解析表达式,同时计算出金属板产生的电场。运用推导出的解析表达式计算出在流动介质中任意场点处金属板随不同流速产生的腐蚀电位,并通过实验验证结果的正确性。结果表明,对层流条件下电化学反应产生的电流密度所建模型的结果与实验测量数据吻合度较高,同时电场分布也会随着流体流速及层流方向上长度的变化而发生变化。     

一种金属橡胶元件建模方法研究

用理论和试验相结合的手段研究金属橡胶弹性元件的动力学建模,提出一种新的建模方法,用此方法建立了基于迟滞回线拟和分解的高次弹性复合阻尼模型。该模型用非线性刚度和非线性复合阻尼机理构造,模型中的参数由试验数据辨识。用所建模型重构恢复力-位移迟滞回线,结果表明该模型能很好描述这类非线性振动系统的特性。